Be Excellent To Each Other

And, you know, party on. Dude.

All times are UTC [ DST ]




Reply to topic  [ 31 posts ] 
Author Message
 Post subject: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 21:23 
User avatar
What-ho, chaps!

Joined: 30th Mar, 2008
Posts: 2139
This 20W Wilkinson energy saving light bulb is pissing me off.

I want a god damn 150W incandescent bulb again. >:(

Are there any modern bulbs that can match the AWESOMENESS of a 150W bulb that's been slightly damaged and as a result emits even more light?

_________________
[www.mrdictionary.net]


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 21:56 
User avatar
Chinny chin chin

Joined: 30th Mar, 2008
Posts: 15695
MrD wrote:
This 20W Wilkinson energy saving light bulb is pissing me off.

I want a god damn 150W incandescent bulb again. >:(

Are there any modern bulbs that can match the AWESOMENESS of a 150W bulb that's been slightly damaged and as a result emits even more light?


When I took delivery of my two 800 watt "readheads" last year, they were smoking abit so I had to run them in my office until they stopped smelling/smoking.

Man, your life brightens up with 1600 watts of lighting in a small room. Not to mention the heat!


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:05 
User avatar
Isn't that lovely?

Joined: 30th Mar, 2008
Posts: 11129
Location: Devon
I'm increasingly hating bright lights, I've always preferred no lights on at all when watching TV or on the PC or whatever, but I just can't stand direct light. It has to be shaded/reflected of a dull surface.

I'm increasingly finding the same outside too when it's really bright outside (and no I'm not talking about looking AT THE SUN) I actually think I'd be better of wearing shades or a baseball cap or something. I hate wearing hats, and I'm not really a shades person.

If I didn't know any better I'd worry that I was slowly turning into a vampire...

Malc

_________________
Where's the Kaboom? I was expecting an Earth shattering Kaboom!


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:11 
User avatar
baron of techno

Joined: 30th Mar, 2008
Posts: 24136
Location: fife
What about one of these bastards?

http://www.bltdirect.com/product.php?pi ... tt+BC&cat=

To be honest though, you might be better off with a bit of directional light with multiple sources - a blinding fuck-off powerful bulb hanging from the middle of the ceiling was never a terribly good idea, even in the 1950s. Get some uplight and adjustable spots for your work area maybe.

edit: or.. yikes! http://www.bltdirect.com/product.php?pi ... tt+BC&cat=
8)


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:22 
User avatar
Chinny chin chin

Joined: 30th Mar, 2008
Posts: 15695
Malc wrote:
If I didn't know any better I'd worry that I was slowly turning into a vampire...
Malc


Have you been developing a Scots accent and a sweet tooth by any chance?


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:22 
User avatar
What-ho, chaps!

Joined: 30th Mar, 2008
Posts: 2139
I can't have additional lights: there is no space for them and nowhere to plug them in.

_________________
[www.mrdictionary.net]


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:25 
User avatar
Skillmeister

Joined: 27th Mar, 2008
Posts: 27023
Location: Felelagedge Wedgebarge, The River Tib
I have no idea about bright bulbs, but why not consider a portable lighting solution?

Image

_________________
Washing Machine: Fine. Kettle: Needs De-scaling. Shower: Brand new. Boiler: Fine.
Archimedes Hotdog Rhubarb Niner Zero Niner.


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:26 
User avatar
What-ho, chaps!

Joined: 30th Mar, 2008
Posts: 2139
I'm not sure how portable a severed head really is.

_________________
[www.mrdictionary.net]


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:27 
User avatar
Skillmeister

Joined: 27th Mar, 2008
Posts: 27023
Location: Felelagedge Wedgebarge, The River Tib
Ask John the Baptist.

_________________
Washing Machine: Fine. Kettle: Needs De-scaling. Shower: Brand new. Boiler: Fine.
Archimedes Hotdog Rhubarb Niner Zero Niner.


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:28 
User avatar
baron of techno

Joined: 30th Mar, 2008
Posts: 24136
Location: fife
Need additional light? Try using paraffin soaked newspaper as a torch.


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:28 
User avatar
Chinny chin chin

Joined: 30th Mar, 2008
Posts: 15695
Dimrill wrote:
I have no idea about bright bulbs, but why not consider a portable lighting solution?

Image


Is that Hugo Myatt?*





* 107 bananas for the first person to know who he is.


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:30 
User avatar
Chinny chin chin

Joined: 30th Mar, 2008
Posts: 15695
Lack of light makes some people sad:

Image

Although lack of cake, crisps, chips, booze and cocaine and the money to buy them also makes some people sad.




This message was brought to you by Mr Kipling Cakes and Green Giant.


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:32 
User avatar
Skillmeister

Joined: 27th Mar, 2008
Posts: 27023
Location: Felelagedge Wedgebarge, The River Tib
"Men like breasts because there are two of them, and that represents good value." - Simon Munnery.

_________________
Washing Machine: Fine. Kettle: Needs De-scaling. Shower: Brand new. Boiler: Fine.
Archimedes Hotdog Rhubarb Niner Zero Niner.


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:33 
User avatar
Chinny chin chin

Joined: 30th Mar, 2008
Posts: 15695
Dimrill wrote:
"Men like breasts because there are two of them, and that represents good value." - Simon Mammary.


FTFY.


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:40 
User avatar
What-ho, chaps!

Joined: 30th Mar, 2008
Posts: 2139
Is that what you think I look like?

_________________
[www.mrdictionary.net]


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:43 
User avatar
What's this bit for exactly?

Joined: 6th Dec, 2008
Posts: 880
Location: Caerdydd
http://www.lampspecs.co.uk/Light-Bulbs-Tubes/Energy-Saving-Spiral-ES/Low-Energy-Spiral-30W-ES-827-Prolite

Or if you want a bluer light:
http://www.lampspecs.co.uk/Light-Bulbs-Tubes/Energy-Saving-Spiral-Daylight/Low-Energy-Spiral-30W-BC-865-Prolight


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Mon Mar 16, 2009 22:45 
User avatar
Chinny chin chin

Joined: 30th Mar, 2008
Posts: 15695
MrD wrote:
Is that what you think I look like?


No.

Except for the tits, natch.


Anyway, seems to me that what you need is some good quality light. Uplighters are the best for PC work and you can pick an uplighter lamp up from Homebase for about 30 quid.


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Tue Mar 17, 2009 10:30 
User avatar

Joined: 31st Mar, 2008
Posts: 8653
chinnyhill10 wrote:
Dimrill wrote:
I have no idea about bright bulbs, but why not consider a portable lighting solution?

Image


Is that Hugo Myatt?*

* 107 bananas for the first person to know who he is.


Was he the guy from Knightmare?


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Tue Mar 17, 2009 10:32 
User avatar
Unpossible!

Joined: 27th Jun, 2008
Posts: 38584
chinnyhill10 wrote:
Lack of light makes some people sad:
[img]FatsadKerry.jpg[/img]

That's a shame y'know, I used to quite fancy that.

Was it her who sold a breast implant recently? Brrrr.....


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Tue Mar 17, 2009 10:35 
SupaMod
User avatar
Est. 1978

Joined: 27th Mar, 2008
Posts: 69668
Location: Your Mum
Joans wrote:
chinnyhill10 wrote:
Dimrill wrote:
I have no idea about bright bulbs, but why not consider a portable lighting solution?
hugo.jpg

Is that Hugo Myatt?*
* 107 bananas for the first person to know who he is.

Was he the guy from Knightmare?

Yup. Why exactly is he being discussed in a thread about light bulbs?

_________________
Grim... wrote:
I wish Craster had left some girls for the rest of us.


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Tue Mar 17, 2009 11:02 
User avatar

Joined: 31st Mar, 2008
Posts: 8653
Grim... wrote:
Joans wrote:
chinnyhill10 wrote:
Dimrill wrote:
I have no idea about bright bulbs, but why not consider a portable lighting solution?
hugo.jpg

Is that Hugo Myatt?*
* 107 bananas for the first person to know who he is.

Was he the guy from Knightmare?

Yup. Why exactly is he being discussed in a thread about light bulbs?


Spellcasting
L-I-G-H-T-B-U-L-B-S

I have no idea, sorry.
Alternative answer - Chinny + 80's = derail :p


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Wed Mar 31, 2010 20:50 
User avatar
baron of techno

Joined: 30th Mar, 2008
Posts: 24136
Location: fife
Ooh, I just found out about this:

http://architectures.danlockton.co.uk/2 ... ight-idea/

And it's completely pissed me off >:(


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Thu Apr 01, 2010 1:04 
User avatar
What-ho, chaps!

Joined: 30th Mar, 2008
Posts: 2139
I'm still using that exact same damn bulb one year later. Every other replacement that claims to be the same wattage is in fact less bright at maximum brightness.

I still want a "40W usage -> 200W equivalent" bulb. DAMN. IT.

_________________
[www.mrdictionary.net]


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Thu Apr 01, 2010 9:29 
User avatar
baron of techno

Joined: 30th Mar, 2008
Posts: 24136
Location: fife
http://www.bigclive.com/hamster.htm


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Thu Apr 01, 2010 11:19 
User avatar
What's this bit for exactly?

Joined: 6th Dec, 2008
Posts: 880
Location: Caerdydd
Dude... I'm repeating myself but:
http://www.lampspecs.co.uk/Light-Bulbs-Tubes/Energy-Saving-Spiral-BC/Low-Energy-Spiral-30W-BC-827-Prolite
or
http://www.lampspecs.co.uk/Light-Bulbs-Tubes/Energy-Saving-Spiral-ES/Low-Energy-Spiral-30W-ES-827-Prolite
if you have light fittings from IKEA.

I got one for a single-bulb room, and they are pretty damn good. It can take a minute or two to warm up to full awesomeness, but they are pretty bright even after 10 secs.

LampSpecs is good company - I found them when I was looking for DIMMABLE energy saving candle bulbs. I had one broken bulb in my box (not surprising tbh), and when I told em they sent a replacement straight away for free.


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Thu Apr 01, 2010 12:22 
User avatar

Joined: 30th Mar, 2008
Posts: 14312
Location: Shropshire, UK
My parents' new-build bungalow has 4-pin lightbulbs and it's a pain in the ass finding replacements. The wiring in the place is clearly dodgy as they consistently blow after a few months, too.


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Thu Apr 01, 2010 12:29 
User avatar
baron of techno

Joined: 30th Mar, 2008
Posts: 24136
Location: fife
3 pin bayonet cap, you mean?

Also, "dodgy wiring" can't cause lights to "blow". It might cause them to go out until the fault is fixed, and it might conceivably start a fire, but other than that, no.

There might be an over-voltage condition, which is easily checked. Or the bulbs used might be bad ones. This is more likely - some of mine have been in place for 8 years.

The 3-pin ones are clearly specially manufactured for this daft requirement, only one manufacturer seems to bother and it's quite possibly giving rubbish quality bulbs (as it knows anyone sensible will be changing the sockets to 2-pin as soon as the building inspector has pissed off).


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Thu Apr 01, 2010 14:02 
User avatar

Joined: 30th Mar, 2008
Posts: 14312
Location: Shropshire, UK
No, 4-pin. They're not the bayonet cap bulbs, they're 4-pin "push-to-fit" bulbs.

Dodgy bulbs would seem to be the most reasonable explanation then, as we can't find them in any hardware store in town (including the B&Q Superstore) and have to get them direct off the council that rents them the bungalow.


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Thu Apr 01, 2010 14:17 
User avatar
baron of techno

Joined: 30th Mar, 2008
Posts: 24136
Location: fife
Ah, this means that the tube is separate from the ballast.
The original CFL lamps were like that (i.e. they had a ballast which plugged into the bayonet socket and the tube plugged into the ballast).

Another type has a separate electronic ballast, often running several tubes. This is at least vaguely sensible because it avoids throwing away the electronics and ballast with the tube, which doesn't last as long.
On the other hand the range available is poor and the price higher than the integrated ones.

e.g.
Image

Anyway if they're blowing these tubes frequently, it could well be the fault of the ballast!

I'd rip it out and fit normal bayonet sockets if possible.


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Thu Apr 01, 2010 18:22 
User avatar
What's this bit for exactly?

Joined: 6th Dec, 2008
Posts: 880
Location: Caerdydd
GazChap wrote:
My parents' new-build bungalow has 4-pin lightbulbs and it's a pain in the ass finding replacements. The wiring in the place is clearly dodgy as they consistently blow after a few months, too.

Ahem...
http://www.lampspecs.co.uk/Light-Bulbs-Tubes/Compact-Fluorescent
There's like 4 page of depth for choosing pin types/wattages for push-fit compact flourescents.
Chances are they will have the bulbs you need in some decent wattages too.


Top
 Profile  
 
 Post subject: Re: Let there be light bulbs
PostPosted: Thu Apr 01, 2010 23:10 
User avatar
baron of techno

Joined: 30th Mar, 2008
Posts: 24136
Location: fife
Congratulations by the way.


Top
 Profile  
 
Display posts from previous:  Sort by  
Reply to topic  [ 31 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: Columbo, The Greys and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search within this thread:
You are using the 'Ted' forum. Bill doesn't really exist any more. Bogus!
Want to help out with the hosting / advertising costs? That's very nice of you.
Are you on a mobile phone? Try http://beex.co.uk/m/
RIP, Owen. RIP, MrC. RIP, Dimmers.

Powered by a very Grim... version of phpBB © 2000, 2002, 2005, 2007 phpBB Group.