Be Excellent To Each Other

And, you know, party on. Dude.

All times are UTC [ DST ]




Reply to topic  [ 49 posts ] 
Author Message
 Post subject: The Desk and Chair Thread
PostPosted: Wed Jun 24, 2009 14:23 
User avatar
Chinny chin chin

Joined: 30th Mar, 2008
Posts: 15695
Shhhh, nobody tell Mrs Chinny that I just spaffed over 100 quid on a office chair.

http://www.viking-direct.co.uk/a/sku%2Fbusiness%2FRome-Superior-Executive-Chair-Black/pr=Q27&id=979260/

To be fair it's nowhere near as expensive as the chair I'm currently sitting in and a decent chair is important when working.

Now need to find a desk. This desk came off Ebay and was second hand and excellent. Sadly all the new desks look wanky and I can't say I'm keen. Need a good old fashioned 80's style office desk that is unfussy and doesn't have drawers.


Last edited by kalmar on Wed Jun 24, 2009 16:01, edited 1 time in total.
Split from Bits and Bobs!


Top
 Profile  
 
 Post subject: Re: Bits and Bobs Edition Volume IX
PostPosted: Wed Jun 24, 2009 14:27 
User avatar

Joined: 30th Mar, 2008
Posts: 32624
"ample proportion"? I'm sold.

This is my desk: http://www.ikea.com/gb/en/catalog/products/10111489. It's nothing but a cheap big flat space.


Top
 Profile  
 
 Post subject: Re: Bits and Bobs Edition Volume IX
PostPosted: Wed Jun 24, 2009 14:30 
User avatar
Master of dodgy spelling....

Joined: 25th Sep, 2008
Posts: 22629
Location: shropshire, uk
Cool chair, I have been looking for on for the home office..

_________________
MetalAngel wrote:
Kovacs: From 'unresponsive' to 'kebab' in 3.5 seconds


Top
 Profile  
 
 Post subject: Re: Bits and Bobs Edition Volume IX
PostPosted: Wed Jun 24, 2009 14:32 
User avatar
Part physicist, part WARLORD

Joined: 2nd Apr, 2008
Posts: 13421
Location: Chester, UK
You know which chairs are surprisingly comfortable?

These:

Image

I scoffed at getting one until I sat down.


Top
 Profile  
 
 Post subject: Re: Bits and Bobs Edition Volume IX
PostPosted: Wed Jun 24, 2009 14:36 
User avatar
Part physicist, part WARLORD

Joined: 2nd Apr, 2008
Posts: 13421
Location: Chester, UK
Doctor Glyndwr wrote:
"ample proportion"? I'm sold.

This is my desk: http://www.ikea.com/gb/en/catalog/products/10111489. It's nothing but a cheap big flat space.


I have this one, which is much the same.

Except it's so cheap that instead of little plastic caps to go over screw holes, you get a set of stickers. It's hilarious, but they actually blend in perfectly.

Image


Top
 Profile  
 
 Post subject: Re: Bits and Bobs Edition Volume IX
PostPosted: Wed Jun 24, 2009 14:37 
User avatar

Joined: 30th Mar, 2008
Posts: 32624
Quote:
Size (H)76, (W)110, (D)59cm.


Too small! My Ikea cheapdesk is 140cm across and 77cm deep. In my old office I used to have two of them, side by side. Now that was a work surface.


Top
 Profile  
 
 Post subject: Re: Bits and Bobs Edition Volume IX
PostPosted: Wed Jun 24, 2009 14:39 
User avatar
Part physicist, part WARLORD

Joined: 2nd Apr, 2008
Posts: 13421
Location: Chester, UK
Doctor Glyndwr wrote:
Quote:
Size (H)76, (W)110, (D)59cm.


Too small! My Ikea cheapdesk is 140cm across and 77cm deep. In my old office I used to have two of them, side by side. Now that was a work surface.


I couldn't fit any bigger in here, unfortunately. I've had to juggle things around on my workspace quite a lot, and put up extra shelves to hold the rest of the crap.


Top
 Profile  
 
 Post subject: Re: Bits and Bobs Edition Volume IX
PostPosted: Wed Jun 24, 2009 14:40 
SupaMod
User avatar
Est. 1978

Joined: 27th Mar, 2008
Posts: 69713
Location: Your Mum
Doctor Glyndwr wrote:
"ample proportion"? I'm sold.

This is my desk: http://www.ikea.com/gb/en/catalog/products/10111489. It's nothing but a cheap big flat space.

Mine is in the living room, so it's quite good-looking:
Image
Like that, but black.

_________________
Grim... wrote:
I wish Craster had left some girls for the rest of us.


Top
 Profile  
 
 Post subject: Re: Bits and Bobs Edition Volume IX
PostPosted: Wed Jun 24, 2009 15:46 
User avatar

Joined: 30th Mar, 2008
Posts: 1982
Doctor Glyndwr wrote:
"ample proportion"? I'm sold.

This is my desk: http://www.ikea.com/gb/en/catalog/products/10111489. It's nothing but a cheap big flat space.


I've got one of these: http://www.ikea.com/gb/en/catalog/products/S39837013 - bit bigger, but lots more expensive for some reason (I bought it when it felt like I had endless reserves of cash for such things...). Nice and big and plain though. Cabled tidies/drawers etc. are optional extras.


Top
 Profile  
 
 Post subject: Re: Bits and Bobs Edition Volume IX
PostPosted: Wed Jun 24, 2009 15:47 
User avatar

Joined: 30th Mar, 2008
Posts: 32624
Nik wrote:
I've got one of these: http://www.ikea.com/gb/en/catalog/products/S39837013 - bit bigger, but lots more expensive for some reason (I bought it when it felt like I had endless reserves of cash for such things...). Nice and big and plain though. Cabled tidies/drawers etc. are optional extras.
I nearly bought one of those; the adjustable height struck me as a very useful feature. In the end I bought two of the other one though.


Top
 Profile  
 
 Post subject: Re: Bits and Bobs Edition Volume IX
PostPosted: Wed Jun 24, 2009 15:48 
User avatar
Skillmeister

Joined: 27th Mar, 2008
Posts: 27023
Location: Felelagedge Wedgebarge, The River Tib
I've got some kitchen worksurface in beech effect that I got free as an offcut in a school ICT classroom refurb. It's great.

_________________
Washing Machine: Fine. Kettle: Needs De-scaling. Shower: Brand new. Boiler: Fine.
Archimedes Hotdog Rhubarb Niner Zero Niner.


Top
 Profile  
 
 Post subject: Re: Bits and Bobs Edition Volume IX
PostPosted: Wed Jun 24, 2009 15:50 
User avatar

Joined: 30th Mar, 2008
Posts: 32624
Dimrill wrote:
I've got some kitchen worksurface in beech effect that I got free as an offcut in a school ICT classroom refurb. It's great.
Yeah! I used to have the ultimate old school homemade desk: a door laid across two filing cabinets. Nowt wrong with that. In fact, that's basically what I was looking for when I found that Ikea one: a flat surface on legs and nothing else at all. No drawers, no cable management, nothing.

propose desk thread split.


Top
 Profile  
 
 Post subject: Re: Bits and Bobs Edition Volume IX
PostPosted: Wed Jun 24, 2009 15:59 
User avatar
Master of dodgy spelling....

Joined: 25th Sep, 2008
Posts: 22629
Location: shropshire, uk
Doctor Glyndwr wrote:
Dimrill wrote:
I've got some kitchen worksurface in beech effect that I got free as an offcut in a school ICT classroom refurb. It's great.
Yeah! I used to have the ultimate old school homemade desk: a door laid across two filing cabinets. Nowt wrong with that. In fact, that's basically what I was looking for when I found that Ikea one: a flat surface on legs and nothing else at all. No drawers, no cable management, nothing.

propose desk thread split.



I started a desk thread months ago, when I was doing my home office up...

In the end I did a work top, with a cable tidy underneath from ikea..

_________________
MetalAngel wrote:
Kovacs: From 'unresponsive' to 'kebab' in 3.5 seconds


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jun 24, 2009 16:06 
User avatar
Hibernating Druid

Joined: 27th Mar, 2008
Posts: 49354
Location: Standing on your mother's Porsche
My MFI desk has done me proud, been dismantled a couple of times too and not crumbled to sawdust. It was an L shaped desk but I slung the _ bit leaving the |.

I got one of these laptop trays from Ikea a while back:
http://www.ikea.com/gb/en/catalog/products/60115791

It's good but not perfect, the plastic top is a little flimsy and is just a little on the small side for my 15"MacbookPro. I should make a bigger top for it really, but I can't be arsed.

_________________
SD&DG Illustrated! Behance Bleep Bloop

'Not without talent but dragged down by bass turgidity'


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jun 24, 2009 16:07 
SupaMod
User avatar
"Praisebot"

Joined: 30th Mar, 2008
Posts: 17093
Location: Parts unknown
I won a desk and chair in a raffle at work. It cost me £2 and the chair is worth about £120 and the desk is a proper computer desk with a curve and proper holes for leads to go through.

I'd only moved into my new house about 4 months previous, I'd just decorated my computer room and was shopping for a desk and chair.

I was very lucky that day!


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jun 24, 2009 16:16 
User avatar
Part physicist, part WARLORD

Joined: 2nd Apr, 2008
Posts: 13421
Location: Chester, UK
Does anybody else hate keyboard shelves as much as I do? They're invariably only just big enough for a keyboard, so they force your body into awkward RSI-inducing positions to use your computer properly. Everything on one level, please.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jun 24, 2009 16:19 
User avatar

Joined: 30th Mar, 2008
Posts: 32624
Malabar Front wrote:
Does anybody else hate keyboard shelves as much as I do? They're invariably only just big enough for a keyboard, so they force your body into awkward RSI-inducing positions to use your computer properly. Everything on one level, please.
I like them when they are big enough to hold a mouse too, which they are on the slightly crummy split-level desk I am using just now (replacing it with the old Ikea desk I've talking about in this thread soon).


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jun 24, 2009 16:23 
User avatar
Chinny chin chin

Joined: 30th Mar, 2008
Posts: 15695
Doctor Glyndwr wrote:
Malabar Front wrote:
Does anybody else hate keyboard shelves as much as I do? They're invariably only just big enough for a keyboard, so they force your body into awkward RSI-inducing positions to use your computer properly. Everything on one level, please.
I like them when they are big enough to hold a mouse too, which they are on the slightly crummy split-level desk I am using just now (replacing it with the old Ikea desk I've talking about in this thread soon).


The home desk at the moment is a split level affair. I'd quite like a corner unit but other priorities. The chair drives me more batty than the desk to be honest.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jun 24, 2009 16:23 
User avatar
Master of dodgy spelling....

Joined: 25th Sep, 2008
Posts: 22629
Location: shropshire, uk
Malabar Front wrote:
Does anybody else hate keyboard shelves as much as I do? They're invariably only just big enough for a keyboard, so they force your body into awkward RSI-inducing positions to use your computer properly. Everything on one level, please.


yup I do...

_________________
MetalAngel wrote:
Kovacs: From 'unresponsive' to 'kebab' in 3.5 seconds


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jun 24, 2009 16:26 
User avatar

Joined: 30th Mar, 2008
Posts: 1982
Kovacs Caprios wrote:
Malabar Front wrote:
Does anybody else hate keyboard shelves as much as I do? They're invariably only just big enough for a keyboard, so they force your body into awkward RSI-inducing positions to use your computer properly. Everything on one level, please.


yup I do...


Me too. I prefer a big, flat rectangle with everything on. (Also I like freaky ergonomic keyboards, which would never fit on those nasty shelves.)


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jun 24, 2009 16:28 
User avatar
Excellent Member

Joined: 30th Mar, 2008
Posts: 3542
the office chair i'm sitting on costed something like 500€ and has all kinds of gubbins. I still prefer the 70€ IKEA chair i have at home.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jun 24, 2009 16:28 
User avatar
Part physicist, part WARLORD

Joined: 2nd Apr, 2008
Posts: 13421
Location: Chester, UK
Doctor Glyndwr wrote:
I like them when they are big enough to hold a mouse too, which they are on the slightly crummy split-level desk I am using just now (replacing it with the old Ikea desk I've talking about in this thread soon).


That wouldn't be too bad to be fair.

My old desk had a keyboard tray that was only big enough for a keyboard so I was forced into a contorted position every time I wanted to use the keyboard and mouse at the same time. The keyboard shelf also, of course, forces you to sit lower down to fit under the desk. Then there was a monitor shelf, so whilst sitting lower down to be in comfort using the keyboard, the monitor would be raised so high you'd get a sore neck after a few hours. There wasn't a single compromise I could find to sit in comfort for any period of time.

So incredibly glad I got this desk.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jun 24, 2009 16:31 
User avatar
Excellent Member

Joined: 30th Mar, 2008
Posts: 3542
Malabar Front wrote:
Doctor Glyndwr wrote:
I like them when they are big enough to hold a mouse too, which they are on the slightly crummy split-level desk I am using just now (replacing it with the old Ikea desk I've talking about in this thread soon).


That wouldn't be too bad to be fair.

My old desk had a keyboard tray that was only big enough for a keyboard so I was forced into a contorted position every time I wanted to use the keyboard and mouse at the same time.


that's what i have at home. But i have it for 17 or 18 years (i love it so much that my mom let me have it) so that's what i'm used to


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jun 24, 2009 16:42 
User avatar
Chinny chin chin

Joined: 30th Mar, 2008
Posts: 15695
To my right in my office I have a second desk used for a printer and various VCR's and DVD players. It dates from about 1986/1987 when it was purchased from Argos as a computer desk for my CPC.

The only adjustment is that I removed the casters as one broke off when we moved it in here.

So not only is it a retro desk but it has a proper 8 bit pedigree. Not in bad nick either (apart from the lack of casters, natch).


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jun 24, 2009 16:58 
User avatar
What's this bit for exactly?

Joined: 6th Dec, 2008
Posts: 880
Location: Caerdydd
I got one like this:
Image
Only its bright orange :)
Stunningly comfy, and the mesh means my back doesn't get all sweaty & stick to my tshirt - & its one of the few that can take 12+ hours a day without the padding going all flat.

Its kind of like the bit in Pratchett when Vimes realises that he spends more on cheap boots that wear out that rich people who pay alot for a pair that last forever :nerd:


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jun 24, 2009 23:55 
User avatar
Chinny chin chin

Joined: 30th Mar, 2008
Posts: 15695
Mr Dom wrote:
Its kind of like the bit in Pratchett when Vimes realises that he spends more on cheap boots that wear out that rich people who pay alot for a pair that last forever :nerd:


That's like my office one except I don't have the head bit. Problem is that although those chairs try and look like Aeron chairs, I speak from experience that they aren't as good. They are better than most office chairs, but not as good as "the real deal". I inherited an Aeron that my collegue had pilfered from our edit suite at my old job and it was great. I still miss it.

Hence for my home office I've gone for leather. Aeron knock off for office, leather for home.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Sun Jul 10, 2011 23:31 
User avatar
Chinny chin chin

Joined: 30th Mar, 2008
Posts: 15695
2 years on, chair update.

The leather chair at home is not up to the job. So I've just ordered this:

http://www.officefurnitureonline.co.uk/shop/ergohuman-mesh-office-chairs-without-headrest-.html

Hopefully won't give me chronic backache like this leather chair does. Sure it looks lovely but I'm now convinced looks aren't everything.

I did consider an Aeron, but that chair looks like a good compromise.

[edit] And I also refer the honourable readers to my first comment in this thread 2 years ago since the new chair is 3.65 times the cost. 8)


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Sun Jul 10, 2011 23:41 
Best
User avatar
Board Mother

Joined: 6th Apr, 2008
Posts: 11395
Location: Mount Olympus
I actually thought Dimrill was back then.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Sun Jul 10, 2011 23:42 
User avatar
Chinny chin chin

Joined: 30th Mar, 2008
Posts: 15695
Goddess Jasmine wrote:
I actually thought Dimrill was back then.


Dimrill was on the Eggbox last night talking about anal prolapse.

That is all.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Oct 17, 2012 10:56 
User avatar
Unpossible!

Joined: 27th Jun, 2008
Posts: 38652
CAST: RESURRECTION!

Things are progressing nicely with the house move and I have been granted the smallest bedroom as an office/man-cave. By way of staying ahead of the the game, I have decided to plan my desk situation in advance.

The room is 2.95m x 1.96m and currently looks like this:

Attachment:
room.jpg


The angled roof/wall is mirrored on the other side of the window.

I plan to put a desk against the wall under the window. Reading through the thread I reckon I can do this on the cheap. So what do you reckon? Sheet of MDF? Kitchen worksurface? IKEA flat desk? I don't need anything fancy and a large flat rectangle will do the job I reckon.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Oct 17, 2012 11:01 
User avatar
Hibernating Druid

Joined: 27th Mar, 2008
Posts: 49354
Location: Standing on your mother's Porsche
I bought a big rectangular desk top and legs from Ikea.

But I replaced the legs with two Expedit (4 squares) units so I can have more record storage. You can slot drawer units in them too.

_________________
SD&DG Illustrated! Behance Bleep Bloop

'Not without talent but dragged down by bass turgidity'


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Oct 17, 2012 11:03 
User avatar
ugvm'er at heart...

Joined: 4th Mar, 2010
Posts: 22391
Ikea do a selection of different sized desk tops and different legs to attach to them. I'd probably just do that if there is one that fits nice, or get the legs from ikea and some mdf from a diy shop and cut it to whatever crazy shape you want :)

One thing is for certain, make the desktop twice the size you think you'll need, as it won't be big enough regardless.

Plus you want lots of shelves going up those walls.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Sun Oct 21, 2012 22:39 
User avatar
ugvm'er at heart...

Joined: 4th Mar, 2010
Posts: 22391
Spent pretty much the whole day sorting the spare room and now have the uber desk of awesome :)

Image


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Sun Oct 21, 2012 22:49 
User avatar

Joined: 27th Mar, 2008
Posts: 14497
I got a pretty sizeable desk top from Ikea and four legs. It wasn't expensive at all. HOWEVER. Despite telling me in the shop it would be fine on four legs and being pictured in the catalogue on four legs, it was completely un-sturdy. It wobbled like fuck. So I had to go back and buy a £60 set of drawers to replace two of the legs. Now it's fine.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Sun Oct 21, 2012 22:54 
User avatar
ugvm'er at heart...

Joined: 4th Mar, 2010
Posts: 22391
Mine is a desktop from Ikea (well 2 actually, the full desk is 3m long :)) It's a tiny bit wobbly, but not too bad. It helps that it is weighted down by heavy shit.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Mon Oct 22, 2012 6:43 
User avatar
Meh

Joined: 13th Apr, 2008
Posts: 1643
I have a kitchen worktop wood effect with chrome legs. Stretches the length of my computer room and is full of crap.

_________________
Turn your wounds into wisdom


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Sat Dec 29, 2012 15:11 
User avatar
Unpossible!

Joined: 27th Jun, 2008
Posts: 38652
I am currently sat at my recycled desk in my new office chair in my new home office.

Feels good, man.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jan 02, 2013 18:19 
User avatar
Unpossible!

Joined: 27th Jun, 2008
Posts: 38652
Image
The Dave Cave by MrDavPaz, on Flickr


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jan 02, 2013 18:21 
User avatar
Skillmeister

Joined: 27th Mar, 2008
Posts: 27023
Location: Felelagedge Wedgebarge, The River Tib
You foolish fool! That screen facing the door is a terrible decision!

_________________
Washing Machine: Fine. Kettle: Needs De-scaling. Shower: Brand new. Boiler: Fine.
Archimedes Hotdog Rhubarb Niner Zero Niner.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jan 02, 2013 18:22 
User avatar
Unpossible!

Joined: 27th Jun, 2008
Posts: 38652
It's a pretty small room. Options are limited, sadly.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jan 02, 2013 18:45 
User avatar
ugvm'er at heart...

Joined: 4th Mar, 2010
Posts: 22391
Your PC has fallen over.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jan 02, 2013 18:51 
User avatar
Comfortably Dumb

Joined: 30th Mar, 2008
Posts: 12034
Location: Sunny Stoke
DavPaz wrote:
It's a pretty small room. Options are limited, sadly.


Put a lock on the door. Tell 'em it's your dark room.

_________________
Consolemad | Under Logic
Curse, the day is long
Realise you don't belong


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jan 02, 2013 20:29 
User avatar
Unpossible!

Joined: 27th Jun, 2008
Posts: 38652
Trooper wrote:
Your PC has fallen over.

That's no pc, that's my pimped gaming rig. It's rocking a single core athlon 64 at 2.4ghz (stock speed), 4gb of ram and a htpc grade 8500gt graphics card.

Fear my powah!


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jan 02, 2013 20:51 
SupaMod
User avatar
"Praisebot"

Joined: 30th Mar, 2008
Posts: 17093
Location: Parts unknown
Is that mouse on a wire?


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Wed Jan 02, 2013 20:54 
User avatar
Unpossible!

Joined: 27th Jun, 2008
Posts: 38652
TheVision wrote:
Is that mouse on a wire?

Low latency for the twitch gaming, innit?


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Fri Jan 04, 2013 12:30 
SupaMod
User avatar
Est. 1978

Joined: 27th Mar, 2008
Posts: 69713
Location: Your Mum
TheVision wrote:
Is that mouse on a wire?

I dislike the balance of wireless mouses. I had one at work for a while but didn't get on with it.

_________________
Grim... wrote:
I wish Craster had left some girls for the rest of us.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Fri Jan 04, 2013 12:31 
SupaMod
User avatar
"Praisebot"

Joined: 30th Mar, 2008
Posts: 17093
Location: Parts unknown
Grim... wrote:
TheVision wrote:
Is that mouse on a wire?

I dislike the balance of wireless mouses. I had one at work for a while but didn't get on with it.


I'm the opposite. I have a wired mouse at work and a wireless one at home and I find that the wire gets in the way at work.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Fri Jan 04, 2013 14:21 
User avatar
Unpossible!

Joined: 27th Jun, 2008
Posts: 38652
My mouse is many years old. I've had it longer than I've had my wife. The wire doesn't bother me.


Top
 Profile  
 
 Post subject: Re: The Desk and Chair Thread
PostPosted: Fri Jan 04, 2013 15:02 
SupaMod
User avatar
"Praisebot"

Joined: 30th Mar, 2008
Posts: 17093
Location: Parts unknown
Conversely, I've had two wired mice in about 10 years. Each of them cost me about £40ish.


Top
 Profile  
 
Display posts from previous:  Sort by  
Reply to topic  [ 49 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: Columbo, markg and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search within this thread:
You are using the 'Ted' forum. Bill doesn't really exist any more. Bogus!
Want to help out with the hosting / advertising costs? That's very nice of you.
Are you on a mobile phone? Try http://beex.co.uk/m/
RIP, Owen. RIP, MrC. RIP, Dimmers.

Powered by a very Grim... version of phpBB © 2000, 2002, 2005, 2007 phpBB Group.